T2 Bay Window compact campervan kitchen pod
Our T2 Bay Window campervan kitchen pod is designed to not only look lovely, but also provide good usable space in your van. Our units are built from strong furniture grade, beautiful birch plywood, all designed to maximise space, and they are designed so that you can put them together at home – they’re delivered to you flat packed.
When it comes to colour you have a lot of choices, our compact kitchen units are finished with a huge choice of laminate colours – 120 semi matt Formica colours, or 30 full gloss colours. We won’t ask you straight away which colour you would like to choose – we’ll let you peruse the Formica site for colours and you can then order samples from them before we get your unit build underway (or of course you can order some samples before ordering your kitchen pod). You can have a look at the colours available at:
Kitchen pod worktops colour – standard lacquered birth ply or a laminate
As standard our kitchen pod comes with a semi-matt lacquered worktop/table top and side box lid, if you prefer you can also have a laminate applied to these elements, either the same colour as the main unit colour, or a contrasting colour.
Our flat pack T2 camper pod package includes:
- Main pod with cutouts for Dometic 2 way fridge and Can 2 Burner combination sink/hob (fridge and sink/hob are not included with the standard package – they are available as options when ordering below)
- Main cupboard
- Concealed drawer
- Rail for table
- Stowaway table which fits on pod rail
- Under worktop LED lights and dimmer switch
- Side unit which fits between the main pod and full-width rock ‘n’ roll bed which houses Campingaz 907 gas bottle and also provides extra storage space
- Gas isolation valve and pipework
- 2X Gas Drop out Floor Vent
- Bed front designed to fit full-width Rusty Lee Rock ‘n’ Roll bed
- 12 Litre fresh water tank
- Submersible fresh water pump
- In line water filter
- Fresh and waste water pipe and fitting
- Clips, fitting brackets screws – all that sort of stuff
- Full instructions and supplier suggestions
Extras to order with your T2 kitchen pod
- Dometic CRX-50 2 way fridge and flush mount frame with matching colour laminate panel
- Can FL1401 – 2 Burner combination sink/hob with 2 burners and piezo ignition
- Extra contrasting colour laminate for worktop/tabletop and side box lid
- Full-width rock ‘n’ roll bed
- 2 colour upholstery for the rock ‘n’ roll bed
But I’m hopeless at DIY!
We understand that everyone isn’t a DIY nerd. If you prefer we can fit your pod for you. There will be a bit of a wait as our workshop is generally pretty booked up, please contact us to establish our availability before ordering
If you already have a bed fitted
If you already have a full width bed fitted, or prefer a different bed to our regular Rusty Lee beds, you will need to check that you have enough space when the bed is down to fit our camper kitchen bed in. The main kitchen pod is 845mm long – before ordering please check you have sufficient space to fit it in with your existing or chosen rock ‘n’ roll bed.
To order online either add our standard package to your basket or add extras from the list below such as appliances, bed and upholstery.
Once you have ordered we will contact you to discuss laminate colours and, if you’ve ordered upholstery; the vinyl colours and options.
Share this item:
You will need some reasonable DIY skills to fit our T2 campervan kitchen pod – if you struggle to put together an Ikea Billy bookcase and are generally scared of a drill, you might want to get someone else to fit this for you!
That said, if you are pretty DIY savy you should be fine. Our cupboards are designed to fit together with standard fittings which you will only need a screwdriver to put together. A drill driver would be useful for fitting brackets and the like and you may need a jigsaw to accurately trim the back of the main pod unit to fit the panels of your van (although they are cut to match a standard wall curve so you might be fine as it is).
The fridge requires some cabling to be laid to it’s connections. We don’t provide and electrics with the package but do provide details of what’s required as well as some suggestions of where you can get them from.
If you prefer, we can fit the units for you – please contact us before ordering though to check when we have availability for fitting as it may be a number of months before we have room in our workshop.
We would suggest the following tools for the fitting of you T2 kitchen pod package
Phillips and slotted screwdrivers
Drill/drill driver (not essential but we certainly use them to put units together!)
Hex bit set (to remove screws in fridge to fit the flush mount frame)
Jigsaw and clean cutting blades (altough you won’t need this if you are happy with our standard cut on the back of our pod)
32mm holesaw for gas drop out holes through the floor (and you need to a drill to fit it to!)
Lead times will vary depending on what you include with your order. Our standard T2 kitchen pod package with or without a fridge and hob sink added to the order will take approximately 6 weeks – but please contact us if you need your order sooner and we can see what we can do.
Lead times will increase if you order bed and upholstery and may take up to 8 weeks.
Please contact us if you require your Kitchen pod and added extras before ordering so we can confirm if your date is achievable.